Keyless Emulator TETRIS Cryptograbber for KIA and HYUNDAI 2006-2022+

We are pleased to announce a new version of the keyless emulator TETRIS – cryptograbber for KIA and HYUNDAI.
The emulator is built into the game console “Tetris” and is visually indistinguishable from the original. The absence of external cables, antennas and other modifications makes it convenient to use and unnoticeable to others.

TETRIS Cryptograbber is able to quickly and independently emulate (calculate, create, hack) original keys of KIA and HYUNDAI cars. The emulation process takes 20-30 minutes on average and does not require the device to be near the car all the time. You can simply go about your business while the Cryptograbber emulates the original key. After the emulation process is completed, the original key of the car from which the key was emulated is stored in 1 of the device’s 10 memory cells. In other words, TETRIS now becomes the original key from the car, while the main original key is not affected and is not informed about it. You can fill all 10 memory cells of the Tetris Keyless Emulator with keys from different cars and use them whenever you want. With the help of TETRIS emulator you can open and close your car at any time and as often as you want, the same goes for starting the engine – now Tetris controls your car or your parking lot.

Main functions:

1. Disable standard alarm
2. Emergency engine start
3. Open/close central locking
4. Locking of non-standard systems connected via diagnostic procedures, programming and CAN bus binding.

Keys 18, A9, AA, 39, 88

After the work is done, you can still use your original keys!

TETRIS works with cars from 2006 to 2022+

“+” means that some 2023-2024 models also work, but not all!

Button assignment:

A – <Left> (Left arrow)
R – <Right> (Right arrow)
X – <Up> (Up arrow)
B – <Down> (Down arrow)
L – <Enter> (Continue)
U – <ЕSС> (Cancel)
Select – Used for various functions
Start – Used for various functions

Device Control:

1.  Turn on the power.
2.  If a PIN code is set, it can be entered using the following keys: <Up> and <Down> keys to enter numbers at the current position/location; <Left> and <Right> keys to move between positions/locations. After setting the desired PIN code, press <Enter> to continue.
3.  Select the desired menu item:
   A. <New Scan> – Enter a new code;
   B. <Key Emulation> – work with a previously captured code in key emulation mode;
   C. <Config> – Configure device parameters;
   D. <Info> – View information about the device version, device identification, software updates, etc.

Enter and calculate a new code for emulation (item A):

After selecting this item, a machine type selection menu is displayed. You must select the machine type with the <up> and <down> arrows and press <Enter> to continue. You will then need to capture 4 code sequences from 2 machines. To do this, press the button on the machine handle several times (from 2 to 4). After successfully capturing all 4 codes, the device will automatically start calculating the codes.
Upon completion of the calculation, the device will automatically switch to <Key Emulator> mode.
To interrupt the calculation process, you can press the <Home> key.

List of supported vehicles:

KIA:

Sportage 4G (2016 – 2018)
Sportage 4G FL (2018 – 2020)
Sorento ЗG (2014 – 2017)
Sorento ЗG FL (2017 – 10.2020)
Stinger 1G (2017 – 05.2020)
Niro 1G (2016 – 2021)
Niro Plug-In Hybrid (2016 – 2021)
Genesis G70 (2017 – 2020)
Genesis GV80 (2020 – 2022)

HYUNDAI:

Palisade (2018 – 2021)
Tucson ЗG (2015 – 2018)
Tucson ЗG FL (2018 – 2020)
Tucson 4G (05.2020+)
Santa Fe 4G (2018 – 2020)
Santa Fe 4G FL (03.2020+)
Kona (2017 – 2020)
Kona Hybrid (2017 – 2020)
Kona Electro (2017 – 2020)
ITonig Hybrid 1G (2016 – 2021)
Sonata 8 (2019 – 2021)

and Old System PIN Entering (2012 – 2018)

Selecting Old System PIN Entering requires a six-digit vehicle code, which can be obtained from a dealer by VIN code or other means.

The following vehicles are supported in this mode:

KIA:

Venga 2009 – 2020
К5 2010 – 2015
Borrego 2010 – 2013
Optima 2010 – 06.2015
Picanto 2011 – 2017
Cadenza 2013 – 2016
Sportage 2010 – 2016
Sorento 2010 – 08.2014
Carens 2012 – 2018

HYUNDAI:

i30 2011 – 2014
ix20 2010 – 2015
ix35 2010 – 08.2013
Accent 2010 – 2014
Veloster 2011 – 2018
Grandeur 2011 – 2014
Genesis 2009 – 2013
Equus 2012 – 2014
Elantra 2010 – 2013
Azera 2011 – 2015
Sonata 2009 – 2014
SantaFe II 2009 – 2012
SantaFe III 2012 – 2018
Grand SantaFe 2012 – 2018
Tucson 2010 – 08.2013

Keyless Emulator TETRIS is a reliable and high quality device. This device is a sales leader in Eastern Europe and former CIS countries, but is also in demand in the EU, USA and Canada.

When you buy a TETRIS Emulator Keyless Go/Entry from us, you are guaranteed to get an original product from the manufacturer.

Only original products purchased from us are entitled to 1 year warranty.